Cisco ASA 5500 Series Adaptive Security Appliances

Downloads Cisco Secure Desktop (CSD 3.1.x) on ASA 7.2.x for Windows Configuration Example using ASDM Related Documents • Cisco Secure Desktop (CSD 3.1.x) on ASA 7.2.x for Windows Configuration Example using ASDM • Cisco ASA 5500 Series Adaptive Security Appliances Configuration Examples and TechNotes • Cisco Secure Desktop Configuration Examples and TechNotes • Cisco SSL VPN Client Configuration Examples and TechNotes • Cisco Adaptive Security Device Manager Configuration Examples and TechNotes More... Related Products/Technology • Cisco SSL VPN Client • Cisco ASA 5500 Series Adaptive Security Appliances • Cisco Adaptive Security Device Manager • Cisco Secure Desktop Related Discussion

Introduction

Cisco Secure Desktop (CSD) extends the security of SSL VPN technology. CSD provides a separate partition on a user's workstation for session activity. This vault area is encrypted during sessions and completely removed at the end of an SSL VPN session. Windows can be configured with the full security benefits of CSD. Macintosh, Linux, and Windows CE have access only to the Cache Cleaner, Web Browsing, and File Access features. CSD can be configured for Windows, Macintosh, Windows CE, and Linux devices on these platforms:

• Cisco Adaptive Security Appliance (ASA) 5500 Series

• Cisco routers that run Cisco IOS^® Software Releases 12.4(6)T and later

• Cisco VPN 3000 Series concentrators Version 4.7 and later

• Cisco WebVPN Module on Catalyst 6500 and 7600 Series routers

Note: CSD Release 3.3 now lets you configure Cisco Secure Desktop to run on remote computers that run Microsoft Windows Vista. Previously, Cisco Secure Desktop was limited to computers that ran Windows XP or 2000. Refer to the New Feature Enhancement - Secure Desktop on Vista section of the Release Notes for Cisco Secure Desktop, Release 3.3, for more information.

This example primarily covers the installation and configuration of CSD on the ASA 5500 Series for Windows clients. Optional configurations for Windows CE, Mac, and Linux clients are added for completion.

CSD is used in conjunction with SSL VPN technology (Clientless SSL VPN, Thin-Client SSL VPN, or SSL VPN Client (SVC)). CSD adds value to the secure sessions of SSL VPN technology.

Prerequisites

Requirements

Ensure that you meet these requirements before you attempt this configuration:

Requirements for theASA device

• Cisco CSD release 3.1 or later

• Cisco ASA software Version 7.1.1 or later

• Cisco Adaptive Security Device Manager (ASDM) release 5.1.1 or later

  Note: CSD Version 3.2 supports on ASA Version 8.x only

  Note: Refer to Allowing HTTPS Access for ASDM in order to allow the ASA to be configured by the ASDM.

Requirements for Client computers

• Remote clients should have local administrative privileges; it is not required, but it is highly suggested.

• Remote clients must have Java Runtime Environment (JRE) Version 1.4 or higher.

• Remote client browsers: Internet Explorer 6.0, Netscape 7.1, Mozilla 1.7, Safari 1.2.2, or Firefox 1.0

• Cookies enabled and Popups allowed on remote clients

Components Used

The information in this document is based on these software and hardware versions:

• Cisco ASDM Version 5.2(1)

• Cisco ASA Version 7.2(1)

• Cisco CSD Version-securedesktop-asa-3.1.1.32-k9.pkg

The information in this document was created from the devices in a specific lab environment. All the devices used in this document began with a cleared (default) configuration. If your network is live, make sure that you understand the potential impact of any command. The IP addresses used in this configuration are RFC 1918 addresses. These IP addresses are not legal on the Internet and are to be used only in a test lab environment.

Conventions

Refer to the Cisco Technical Tips Conventions for more information on document conventions.

Background Information

CSD operates with SSL VPN technology, so the Clientless, Thin-Client, or SVC should be activated before the configuration of CSD.

Network Diagram

Different Windows Locations can be configured with the full security aspects of CSD. Macintosh, Linux, and Windows CE have access only to the Cache Cleaner and/or web browsing and file access.

This document uses this network setup:

Configure CSD on the ASA for Windows Clients

Configure CSD on the ASA for Windows Clients with five major steps:

• Obtain, install, and enable the CSD software on the Cisco ASA.

• Define Windows Locations.

• Define Windows Location Identification.

• Configure Windows Location Modules.

• Configure Windows Location Features.

• Optional Configuration for Windows CE, Macintosh, and Linux Clients.

Obtain, Install, and Enable the CSD Software

Complete these steps to obtain, install, and enable the CSD software on the Cisco ASA.

1. Download the CSD software securedesktop-asa*.pkg and readme files onto your management station from the Cisco Software Download website.

2. Log in to ASDM and click the Configuration button. From the left menu, click the CSD Manager button, and click the Cisco Secure Desktop link.

   

3. Click Upload to display the Upload Image window.

   1. Either enter the path of the new .pkg file on the management station or click Browse Local Files to locate file.

   2. Either enter the location on flash in which to place the file or click Browse Flash.

   3. Click Upload File.

   4. When prompted, click OK > Close > OK.

   

4. Once the client image is loaded to flash, check the Enable SSL VPN Client check box, and then click Apply.

5. Click Save, and then click Yes to accept the changes.

Define Windows Locations

Complete these steps to define Windows Locations.

1. Click the Configuration button.

2. From the left menu, click the CSD Manager button, and click the Cisco Secure Desktop link.

3. From the navigation pane, click Windows Location Settings.

4. Type a location name in the Location to Add field and click Add.

   Note the three locations in this example: Office, Home, and Others.

   • Office represents workstations that are located inside the security boundary of the corporation.

   • Home represents users who work from home.

   • Other represents any location other than the two locations mentioned.

   

5. Create your own locations dependent on the layout of your network architecture for sales, guests, partners, and others.

6. As you create Windows Locations, the navigation pane expands with configurable modules for each new location. Click Apply All.

7. Click Save, and then click Yes to accept the changes.

Windows Location Identification

Complete these steps to define Windows Location Identification.

1. Identify the locations that were created in Define Windows Locations.

   

2. To identify the location Office, click Office in the navigation pane.

   1. Uncheck Secure Desktop and Cache Cleaner because these are internal computers.

   2. Check Enable identification using IP criteria.

   3. Enter the IP address ranges of your internal computers.

   4. Check Enable identification using registry or file criteria. This differentiates internal office workers from the occasional guests on the network.

   

3. Click Configure Criteria. A simple example of a file "DoNotDelete.txt" is configured. This file must exist on your internal Windows computers and is simply a placeholder. You can also configure a Windows registry key to identify internal office computers. Click OK in the Add File Criterion window. Click OK in the Registry and File Criteria window.

   

4. Click Apply All in the Identification for Office window. Click Save, and then click Yes to accept the changes.

5. To identify the location Home, click Home in the navigation pane.

   1. Check Enable identification using registry or file criteria.

   2. Click Configure Criteria.

   

6. Home computer clients must have been configured with this registry key by an Administrator. Click OK in the Add Registry Criterion window. Click OK in the Registry and File Criteria window.

   

7. Under Location Module, check Secure Desktop. Click Apply All in the Identification for Home window. Click Save, and then click Yes to accept the changes.

8. To identify the location Other, click Other in the navigation pane.

   1. Check only the Cache Cleaner box and uncheck all other boxes.

   2. Click Apply All in the Identification for Other window.

   3. Click Save, and then click Yes to accept the changes.

   

Configure Windows Location Module

Complete these steps to configure the modules under each of the three locations you created.

1. For Office clients, do nothing since Secure Desktop and Cache Cleaner were not chosen in the previous steps. The ASDM application allows you to configure the Cache Cleaner even if it were not chosen in a previous step. Keep the default settings for the Office locations.

   Note: The VPN Feature Policy is not discussed in this step, but it will be discussed in a subsequent step for all locations.

2. For Home clients, click Home and Keystroke Logger in the navigation pane.

   1. In the Keystroke Logger window, check Check for keystroke loggers.

   2. Click Apply All in the Keystroke Logger window.

   3. Click Save, and then click Yes to accept the changes.

   

3. Under Home, choose Cache Cleaner and the parameters to suit your environment.

   

4. Under Home, choose Secure Desktop General and the parameters to suit your environment.

   

5. Under Home, choose Secure Desktop Settings.

   1. Check Allow email applications to work transparently, and configure the other settings to suit your environment.

   2. Click Apply All.

   3. Click Save, and then click Yes to accept the changes.

   

Configure Windows Location Features

Configure the VPN Feature policy for each of the locations you created.

1. In the navigation pane, clickOffice, and then click VPN Feature Policy.

2. Click the Group-Based Policy tab.

   1. Click the Always use Success Group-Policy radio button.

   2. Click the Web browsing tab, and check the Always Enabled radio button.

   3. Follow the same procedure for the File access, Port forwarding, and Full tunneling tabs.

   4. Click Apply All.

   5. Click Save, and then click Yes to accept the changes.

   

3. For Home users, each corporation can require specific policies before access is allowed. In the navigation pane, click Home, and click VPN Feature Policy.

   1. Click the Group-Based Policy tab.

   2. Click the Use Success Group-Policy radio button if preconfigured criteria match, such as a specific registry key, known file name, or digital certificate.

   3. Check theLocation Module checkbox and choose Secure Desktop.

   4. Choose the Anti-Virus, Anti-Spyware, Firewall, and OS areas in accordance with your company security policy. Home users will not be allowed onto the network unless their computers meet your configured criteria.

   

4. In the navigation pane, click Other and click VPN Feature Policy.

   1. Click the Group-Based Policy tab.

   2. Click the Always use Success Group-Policy radio button.

   

5. For clients in this VPN Feature Policy location, click the Web Browsing tab, and click the Always Enabled radio dial.

   1. Click the File Access tab, and click the Disable radio button.

   2. Repeat the step with the Port Forwarding and Full Tunneling tabs.

   3. Click Apply All.

   4. Click Save, and then click Yes to accept the changes.

   

Optional Configurations for Windows CE, Macintosh, and Linux Clients

These configurations are optional.

1. If you choose Windows CE from the navigation pane, check the Web browsing check box.

   

2. If you choose Mac and Linux Cache Cleaner from the navigation pane, check the Launch cleanup upon global timeout radio dial.

   1. Change the timeout to your specification.

   2. Under theVPN Feature Policy area, check the Web browsing , File access, and Port forwarding radio dials for these clients.

   

3. Whether you choose Windows CE or Mac and Linux Cache Cleaner, click Apply All.

4. Click Save, and then click Yes to accept the changes.

Configure

Configuration

This configuration reflects the changes ASDM made to enable CSD: Most of the CSD configurations are kept in a separate file on flash.

ciscoasa#show running-config 
 Building configuration...
ASA Version 7.2(1) 

!

hostname ciscoasa

domain-name cisco.com

enable password 2KFQnbNIdI.2KYOU encrypted

names

!

interface Ethernet0/0

 nameif outside

 security-level 0

 ip address 172.22.1.160 255.255.255.0 

!

interface Ethernet0/1

 nameif inside

 security-level 100

 ip address 10.2.2.1 255.255.255.0 

!

interface Ethernet0/2

 shutdown

 no nameif

 no security-level

 no ip address

!

interface Management0/0

 shutdown

 no nameif

 no security-level

 no ip address

 management-only

!

passwd 2KFQnbNIdI.2KYOU encrypted

ftp mode passive

dns server-group DefaultDNS

 domain-name cisco.com

no pager

logging enable

logging asdm informational

mtu outside 1500

mtu inside 1500


!--- ASDM location on disk0


asdm image disk0:/asdm521.bin

no asdm history enable

arp timeout 14400

nat-control

timeout xlate 3:00:00

timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00

timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00

timeout uauth 0:05:00 absolute

!--- some group policy attributes

group-policy GroupPolicy1 internal

group-policy GroupPolicy1 attributes

 vpn-tunnel-protocol IPSec l2tp-ipsec webvpn

 webvpn

  functions url-entry file-access file-entry file-browsing

username user1 password mbO2jYs13AXlIAGa encrypted privilege 15

username user1 attributes

 vpn-group-policy GroupPolicy1

username cisco password 3USUcOPFUiMCO4Jk encrypted privilege 15

username cisco attributes

 vpn-group-policy DfltGrpPolicy

 webvpn

  port-forward none

  port-forward-name value Application Access

http server enable

http 10.2.2.0 255.255.255.0 inside

no snmp-server location

no snmp-server contact

snmp-server enable traps snmp authentication linkup linkdown coldstart

!--- tunnel group information

tunnel-group DefaultWEBVPNGroup general-attributes

 default-group-policy GroupPolicy1

tunnel-group DefaultWEBVPNGroup webvpn-attributes

 hic-fail-group-policy GroupPolicy1

 nbns-server 10.2.2.30 timeout 2 retry 2

telnet timeout 5

ssh timeout 5

console timeout 0

!

class-map inspection_default

 match default-inspection-traffic

!

!

policy-map type inspect dns preset_dns_map

 parameters

  message-length maximum 512

policy-map global_policy

 class inspection_default

  inspect dns preset_dns_map 

  inspect ftp 

  inspect h323 h225 

  inspect h323 ras 

  inspect netbios 

  inspect rsh 

  inspect rtsp 

  inspect skinny 

  inspect esmtp 

  inspect sqlnet 

  inspect sunrpc 

  inspect tftp 

  inspect sip 

  inspect xdmcp 

!

service-policy global_policy global

!--- webvpn parameters

webvpn

 port 1443

 enable outside

 enable inside

!--- csd location

 csd image disk0:/securedesktop-asa-3.1.1.32-k9.pkg

 csd enable

 customization DfltCustomization

  title text YOUR-COMPANY SSL VPN Services

  title style background-color: rgb(204,204,255);color: rgb(51,0,255);

  border-bottom:5px groove #669999;font-size:larger;vertical-align:middle;text-align:

  left;font-weight:bold

 url-list ServerList "Windows Shares" cifs://10.2.2.30 1

 url-list ServerList "Tacacs Server" http://10.2.2.69:2002 2

 tunnel-group-list enable

prompt hostname context 

Cryptochecksum:a840d81f0af21d869db4fa559e83d6d0

: end
 !
 end

Verify

Use this section to confirm that your configurations for Clientless SSL VPN, Thin-Client SSL VPN, or SSL VPN Client (SVC) are operating properly.

Test CSD with a PC that has been configured with various Windows Locations. Each test should provide a different access in accordance with the policies that you have configured in the above example.

You can change the port number and the interface where the Cisco ASA listens for WebVPN connections.

• The default port is 443. If you use the default port, the access is https://ASA IP Address.

• The use of a different port changes the access to https://ASA IP Address:newportnumber.

Commands

Several show commands are associated with WebVPN. You can execute these commands at the command-line interface (CLI) to show statistics and other information. To see the use of show commands in detail, refer to Verifying WebVPN Configuration.

Note: The Output Interpreter Tool ( registered customers only) (OIT) supports certain show commands. Use the OIT to view an analysis of show command output.

Troubleshoot

This section provides information you can use to troubleshoot your configuration.

If you have problems with the remote client, check these:

1. Are pop-ups, Java, and / or ActiveX enabled in the web browser? These may need to be enabled depending upon the type of SSL VPN connection in use.

2. The client must accept the digital certificates presented at the start of the session.

Commands

Several debug commands are associated with WebVPN. For detailed information about these commands, refer to Using WebVPN Debug Commands..

Note: The use of debug commands can adversely impact your Cisco device. Before you use debug commands, refer to Important Information on Debug Commands.

Cisco Support Community - Featured Conversations

Related Information

• Cisco ASA 5500 series Adaptive Security Appliances
• ASA with WebVPN and Single Sign-on using ASDM and NTLMv1 Configuration Example
• Technical Support & Documentation - Cisco Systems